Welcome to the department of electronics and communication engineering in BIT Mangalore. Electronics and Communication Engineering Department was established in the year 2009. It offers 4 years B.E programme, It has dedicated faculty who interact closely with alumni in academia and industry in India and abroad in order to make the programmes to meet the aspirations of different stack holders. ECE department is equipped with state art of the CAD tools, Microelectronics and Microwave equipment. Students are highly innovative and have won several prizes in both national level design contests.ECE department has an excellent placement record which has been consistently above 95 %. Alumni of the ECE Dept occupy key positions in industry and are successful as entrepreneurs. It offers innovative approaches to teaching-learning and encourages virtual learning in order to tap the potential of its highly successful alumni spread all over the globe.
Students are trained to learn about core Electronics and communication engineering subjects like digital electronics and logic design, fundamentals of communication engineering, electronic circuits, signals and systems, power electronics, applied electromagnetic theory, integrated circuits, VLSI, Microcontrollers , Microprocessors, control systems, and computer architecture, Wireless communication, satellite communication GSM, CDMA, Digital communication Networking and mobile computing are just a few to mention.
VISION, MISSION AND CORE VALUES OF THE DEPARTMENT
“To excel in education and research in Electronics & Communication Engineering”.
To educate the students with the state of art technologies to meet the growing challenges of communication and computing
To equip the students with strong foundations to enable them for continuing education.
Programme Educational Objectives
Our Graduates would be successful in Technical and Professional careers.
Our Graduates would be successful in their post-graduate studies at leading institutions.
Graduates of the Electronics and Communication Engineering Program will have the ability.
To design a Wireless communication system, Microprocessor or Micro controlled based security system to meet the specific needs within realistic constraints such as economics, environment, ethics, health, and safety.
To perform investigations, design as well as conduct experiments, analyze and interpret the results to provide valid conclusions.
To select and apply appropriate techniques for the design & analysis of systems using modern VLSI, CAD tools.
To offer engineering solutions to both Hardware and Software.
To understand professional responsibilities and Ethics.
To function effectively either as a member or a leader in multinational companies
To apply engineering & management principles in their own / team projects in a multidisciplinary environment.
Realize the need for lifelong learning and engage them to adopt technological changes.
WELCOME TO THE DEPARTMENT OF ELECTRONICS AND COMMUNICATIONS ENGINEERING
We are living in an age of information & Technology. Electronics is the foundation of Information technology and Computer Age. The giant strides that we have made in the areas of communications and computers are possible only because of the great successes that we have achieved in the field of Electronics & communication. It is sometimes unbelievable, how many electronic gadgets we are carrying these days with us like a digital wristwatch, calculator, cell-phone, digital diary, remote controls, GPS etc. Electronics & Communication Engineering Department understands the importance of preparing engineering students in this competitive world.
The Department of Electronics & Communication Engineering, BIT is imparting high-quality technical education to the budding engineers with the support of well qualified & experienced faculty. Well experienced faculty members with excellent knowledge in diverse fields are the backbone of the department. The departments focus is to impart synergistic education in the field of Electronics & Communication and to produce quality E&C Engineers with high technical knowledge and good practical skills combined with leadership skills.
The department gives exposure to its students, to not only the regular Engineering curriculum but also to the aspirations of today’s corporate world, by inculcating a professional attitude in them. Our labs, with latest facilities and unlimited Internet facility, give our students a cutting edge in technical exploration and enhance their information search and analysis skills. The project which is an important part of their curriculum, not only gives them a chance to understand and explore their area of interest, but it will be an important aspect in their contribution to the company they would join after the degree. Students are encouraged to join various technical and non-technical forums, which in turn gives them exposure to Engineering concepts and technology.
To enhance students conceptual theoretical and practical understanding the ECE Department focuses on the following objectives:
To provide the students with a flexible platform in the laboratories that scales from software to hardware.
To provide students with a completely interactive environment. Guidance and counseling of the students right from the beginning.
Offering soft skills training to the students with an aim to improve their personality in all aspects.
Conducting regular Seminars, Works-shops, and Lectures by eminent experts from various renowned institutes
I am confident that the students of the present batch would justify the credibility of the department by showing a high level of professional competence in their respective job areas.
Gubbi, Abdullah, Mohammed Fazle Azeem, and Zahid Ansari. “New Fuzzy LBP Features for Face Recognition.” arXiv preprint arXiv:1509.06853 (2015).
Lohar, Mehdi Hafeez, Mohammad Hussain, and Abdullah Gubbi. “DWT Colour Image Stenography Based Voice Biometric Authentication System. International Journal of Ethics in Engineering & Management Education (ISSN: 2348-4748, Volume 4, Issue 6, June 2017)
Gubbi, Abdullah, Mohammad Fazle Azeem, and M. Sharmila Kumari. “Non-Binary Local Gradient Contours for Face Recognition.” arXiv preprint arXiv:1411.0442 (2014).
Paper Presented in National Conferences
Gubbi, Abdullah, Madasu Hanmandlu, and Mohammad Fazle Azeem. “A novel LBP fuzzy feature extraction method for face recognition.” India Conference (INDICON), 2013 Annual IEEE. IEEE, 2013.
Gubbi, Abdullah, and M. Deeksha. “Design and analysis of novel fuzzifer circuits in CMOS current mode approach.” VLSI Systems, Architectures, Technology and Applications (VLSI-SATA), 2016 International Conference on. IEEE, 2016.
Gubbi, Abdullah, Mohammad Fazle Azeem, and Nishatbanu ZH Nayakwadi. “Face Recognition Using Local Ternary Pattern and Booth’s Algorithm.” Eco-friendly Computing and Communication Systems (ICECCS), 2014 3rd International Conference on. IEEE, 2014.
Gopinath, Gopika, and Abdullah Gubbi. “Four transistor comparator based PWM for DC-DC Converters.” Next Generation Computing Technologies (NGCT), 2015 1st International Conference on. IEEE, 2015.
Shet, Nagaraj, C. Shreesha, P. V. Rao, and Abdullah Gubbi. “Low-Cost Appliance Control System for Home Automation and Energy Management Using Image Processing.” In Artificial Intelligence and Evolutionary Computations in Engineering Systems, pp. 125-134. Springer India, 2016.
Ujire, Nagaraj Shet Sdmit, Shreesha C. Mit Manipal, and Abdullah Gubbi Pace Ujire. “Intruder Recognition System.” Electrical and Electronic Engineering 5.1 (2015): 6-12.
Shet, Nagaraj, and Shreesha Chokkadi AbdullahGubbi. “Design of Communication Interface for Home Automation Through Power Line.” IJEIR 4.6 (2015): 57-64.
Shet, Nagaraj, C. Shreesha, and Abdullah Gubbi Pace. “Intruder Recognition System.” Electrical and Electronic Engineering 2.1 (2015): 6-12.
Sk, Jamil Ahmed, Manjunath Prasad, Abdullah Gubbi, and Hasibur Rahman. “Active Learning of constraints using an incremental approach in semi-supervised clustering.”
1. Abdullah Gubbi, M.F. Azeem, “Type-2 Fuzzy Logic for Edge Detection of Gray Scale Images”, Fuzzy Inference System, editor- Dr. Mohammad Fazle Azeem ISBN 979-953-307-582-1. InTech International publisher, 2012
Mubeena Parveen Taj , Nithin , Asif Iqbal Mulla, Sushanth K J “The Design of
Phase Locked Loop Using 180nm VLSI Technology” international journal for science
and advance research in technology Volume 4, Issue 7, JULY 2018.
Published paper on “Tongue Controlled Wheel Chair using FSR Sensors” in International Journal of core Engineering and Management Volume 2, pp. 81-90, Issue 10, April 2016.
Published paper on “IoT Based Irrigation System using Natural Resource” in International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering (IJTREEICE), Volume 5, Issue 6, June 2017.
1. Border Alert system for fishermen using GPS system World Journal of Research and Review (WJRR) ISSN:2455-3956, Volume-2, Issue-5, May 2016 Pages 01-042. Effective duplex sign language translator and response using MFCC
 Asif Iqbal Mulla, Sushanth K J, Prashanth Kumar H R, Abubakar Shameez “Border Alert System for Fishermen Using GPS System” World Journal of Research and Review ISSN:2455-3956, Volume-2, Issue-5, May 2016 Pages 01-04. Asif Iqbal Mulla, Sushanth K J, Shreya Rai, Ashritha Salian, Naziya, Kavitha Kalabar “ An Automatic Embedded Toll Plaza with Document Verification and Speed Detection System” International journal of innovative research in electrical, electronics, instrumentation and control engineering vol. 4, issue 5, May 2016. Asif Iqbal Mulla, Sushanth K J, Mranila P, Mohammed Habib Shaikh, Mohammed Swalin, Mohammed Asfar6, Mohammed Yunus Ugrani7 “ Dual Mode Lawn Mower using Sensors and GSM” International Journal of Advanced Research in Computer and Communication Engineering Vol. 5, Issue 5, May 2016. Sushanth K J1, Asif Iqbal Mulla, Suhail Mohammad, Mohammad Ijaz, Usha T.N, Muhammed Nibrasudeen “ Green Refrigerator Implementation using Peltier Cell and GSM” International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering Vol. 5, Issue 6, June 2017. Mubeena Parveen Taj , Nithin , Asif Iqbal Mulla, Sushanth K J “The Design of Phase Locked Loop Using 180nm VLSI Technology” international journal for science and advance research in technology Volume 4, Issue 7, JULY 2018.
Paper Presented in National Conferences
Asif Iqbal. M. Mulla and Anilkumar. V. Nandi “Programmable Blood pressure Waveform Generator for testing and servicing of Blood Pressure equipments”, 56th Annual technical convention & National conference on Growth of Technologies in Electronics, Computer and Telecom, IETE Mumbai, India, 28-29 sept-2013
Paper Presented in International Conferences
 Asif Iqbal. M. Mulla and Anilkumar. V. Nandi “Programmable ECG Waveform Generator for testing and servicing of ECG equipments”, International Conference on Convergence of Science, Engineering & Management in Education & Research, Bangalore, India, 26-27 Sept-2013.
Mohammed Rafeeq, Asif Afzal “Automation of ac system employing plc and Scada” Advances in Modelling and Analysis C (AMA_C) ,Volume 73, Issue 1, March 2018.
Mohammed Rafeeq, Asif Afzal, sree rajendra, Mohammed Samee A. D, “Remote Supervision and Control of Air Conditioning Systems in Different Modes”, Springer Journal, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering.
Paper Presented in International Journals
Presented a paper titled “Facial EmotionRecognition for Human-Machine Interaction using Hybrid DWT-SFET Feature Extraction Technique”, Second International Conference on Cognitive Computing and Information Processing, CCIP – 2016 (August 12th & 13th, 2016),IEEE Bangalore Section.
Mohammed Rafeeq, Abdullah Gubbi, Abhishek “Five Transistor SRAM Cell”, proceeding of international conference on electronics and communication system(ICECS16)”Karpagam,Coimbatore ,India.
Sushanth, Nithin, Kripa, Vinay, Amruth (2016), “Automatic Pesticides Spraying Robot using Machine Vision Technique” International Journal of Advanced Research in Computer Science and Software Engineering, Volume 6, Issue: 05, e-ISSN: 2277 128x.
Mubeena Parveen Taj, Nithin, Asif Iqbal Mulla, Sushanth K J, (2018), “Phase Locked Loop Using 180nm VLSI Technology” International Journals for Science and Advanced Research In Technology, Volume: 04 Issue: 07, e-ISSN: 2395-1052 pp. 932-935.
Nithin., Sushanth K J, Raghu N, (2016), “Estimation and Study of Electromagnetic Radiation levels from Mobile Towers ” is accepted to publish in International Journal of Engineering Research and Management (IJSER), Volume. 03 Issue: 04, ISSN 2364-2058.
Jeril Kuriakose, V. Amruth, A. G. Sandesh, V. Abhilash, G. Prasanna Kumar, and K. Nithin, “A Review on Mobile Sensor Localization,” In Security in Computing and Communications, pp. 30-44. Springer Berlin Heidelberg, 2014. (Published by Springer)
M.Tech (Computer Applications in Industrial Drives)
Total Experience In Years
Papers Presented in Conferences
Paper Presented in International Journals
Published paper on “Tongue Controlled Wheel Chair using FSR Sensors” in International Journal of core Engineering and Management” , Volume 2, pp. 81-90, Issue 10, April 2016.
Paper Presented in National Conference
1. The paper entitled “ Design of Space Vector Based Control Scheme for Brushless Dc (BLDC) Motor Drive ” presented and published in the National Conference on ZEN & TAO held at MSRIT, Bangalore, Jan 7th-9th, 2014
Analog Electronics Lab deals with the experiments related to Analog Electronics circuits. The students will have hands -on experience of Diode based Electronics circuits and Transistor based Electronics circuits. The Major equipments include CROs, Function Generators, Power Supplies
2. LOGIC DESIGN LAB
Logic Design Lab deals with the experiments related to Digital Electronics circuits. The students will have hands -on experience of Logic gates, Combinational and Sequential circuits. The Major equipments include Digital IC trainers, Digital IC Tester, and Patchcords It includes design of Shift Registers, Binary Counters, Multiplexers and Demultiplexers using ICs and Logic Gates.
3. DSP LAB
Digital Signal Processing Lab deals with the experiments related to Digital and image Processing. The students will have hands -on experience on DSP algorithms and Digital filters. The Major equipments include Computers, TEXAS DSP kits, MATLAB software.
4. ANALOG COMMUNICATION + LIC LAB
Analog Communication Lab deals with the experiments related to Communication and OP-AMP circuits. Communication fields include Modulation and Demodulation techniques.LIC includes design of filters, converters, multivibrators etc. The Major equipments include CROs, Function Generators, Power Supplies and Multimeters.
5. VLSI LAB
Objective of this lab is to learn with Digital and Analog IC design. Here we used Cadance tools to design ICs. For Digital IC design here we design digital circuits such as combinational circuit and sequential circuit. Then simulate the design and synthesize to get logic circuit. For analog IC design we learn the Virtuoso tool as well learn the flow of the Full Custom IC design cycle. In the process you will create various components like inverter, differential amplifier, op-amp, R-2R based DAC and Mixed signal design of SAR based ADC
6. POWER ELECTRONICS LAB
Application of electronic circuits to energy conversion is known as power electronics. Objective of this lab is to conduct various experiments and to understand the characteristics of power semiconductor switches like SCR, TRIAC, IGBTs, and MOSFETs. Also, RC triggering circuit for controlled half wave and full wave rectifier, Inverter and converter circuits, and finally about chopper circuits is discussed. In the present days, power electronics has wide number of applications on electrical drive systems. For the better understanding of this system, we deal with experiments on speed control of stepper motor, separately excited motor, and universal motor.
Third-year students of Electronics and Communications Engineering, Fathima Faheema and Fathimath Rameeza participated in Project exhibition in St. Aloysius higher secondary school, Kodial Bail,... Read More
Department of Electronics and Communication has inaugurated the Student Association (ELECSA) at the BIT Auditorium on 28 Sept 2019 at 10:00 AM. The students of all the semester were actively participated... Read More
The Department of Electronics and communications Students Association (ELECSA) organized an invited talk on “Nanotechnology and it’s Applications” at Bearys Institute of Technology, Innoli, Mangalore... Read More
The Department of Electronics and Telecommunications Engineering has a students’ chapter of IETE (Institution of Electronics and Telecommunication Engineers). The ISF (IETE Students Forum) was inaugurated on February 8th 2014. The students’ forum is active in conducting various programs like workshops, invited lectures and exhibitions under the aegis of BIT ISF